article no: 97510
Kids Tramp "Kindergarten XL"
Not vandal-proof - suitable for supervised areas - 2 × 2 m
According to the playground standard DIN EN 1176. The Kids Tramp "Kindergarten XL" is already completely mounted when it is delivered, all that is needed is to glue the bonded impact protection on the frame and set it into a pit. Jumping bed made of PVC-coated synthetics.
Ideal for schools, kindergartens and playgrounds with supervised access.
Accessories: Impact protection system (not included), for EPDM wet pour surfaces PlayPro™ connection/end lip or rubber protection bars recommended!
- TÜV certified (EN 1176)
- The trampoline is TÜV-certified according to the playground equipment standard EN 1176 and is therefore suitable for publicly accessible playgrounds.
- UV-light resistant
- All components (jumping bed, bonded impact protection, steel springs) are made of UV-light resistant material.
- All-season use
- The trampoline is designed und suitable for long-term outdoor use and can be left there all year.
- Patented
- The playground trampoline „Kids Tramp“ is protected by patent law. European Patent No.: 2189189.
- Made in Germany
- Equipment is produced exclusively in our factory in Weilheim/Teck (Germany). We guarantee the use of only the highest quality raw materials in order to guarantee outstanding quality of all components as well as safety and reliability.
- Water-resistant
- The trampoline is equipped with hot-dip galvanized springs and a weather proof jumping bed and thus can be left outdoor even in wet conditions.
- Suitable for wheelchairs
- Safe entry and exit with attendant thanks to rounded edges.
- Approved Competence ✓ BSFH quality seal
- Eurotramps playground trampolines are distinguished with the quality seal of the BSFH (Federal Association of Playground Equipment and Leisure Facility Manufacturers).The BSFH quality seal is awarded every two years and is the industry award for assured quality, social responsibility, organisation and professional expertise.
- details
- accessories
- spare parts
We offer various spare parts for Kids Tramp "Kindergarten XL".
- Jumping beds
- Article-No.: E21879 Jumping bed PVC
Jumping bed made of PVC-coated synthetics. With sewed in anchor bars. Size: 156 × 156 cm. For Kids Tramp "Kindergarten XL", Kids Tramp "Kindergarten Loop XL".
-
- Jumping bed accessories & corresponding spare parts
- Article-No.: E20970 Anchor bar
Anchor bar for Kids Tramp playground trampolines. Hot-dip galvanized.
-
- Steel springs/suspension
- Article-No.: E31120 Steel spring
Steel spring for playground trampolines Kids Tramp, Kids Tramp Track, Sport-Thieme® Adventure-Tramp, Wehrfritz FUN XL and Wehrfritz FUN round. Hot-dip galvanized. Length 145 mm, Ø 20 mm.
-
- Suspension accessories & corresponding spare parts
- Article-No.: E31100 Mounting tool for steel springs
Mounting tool for easier attaching of the steel springs. For Playground Trampolines.
-
- Spare parts for trampoline frame & Safety Platforms
- Article-No.: E41977 Supporting angle
Supporting angle for frame reinforcement for playground trampolines Kids Tramp and Kids Tramp XL. Scope of delivery: 4 pieces, incl. tension chains, quick links, mounting tool for steel springs.
Note: can only be used for Kids Tramps with manufacturing date before 06/2018.
-
- Impact protection
- Article-No.: E97541 Impact protection system EPDM "grey"
Impact protection system EPDM for Kids Tramp XL (frame size 200 × 200 cm), incl. 4 adhesive cartridges. Colour: "grey".
Consisting of 12 impact protection tiles:
• 4× Corner part with miter on the right, 75/47 × 28 cm (E97402)
• 4× Corner part with miter on the left, 75/47 × 28 cm (E97403)
• 4× Middle part, 50 × 28 cm (E97401)
→ NEW FOR ARTICLE E97501
- Article-No.: E97403 Single tile impact protection EPDM, corner piece with miter on the left "grey"
Single tile of playground trampoline impact protection EPDM for Kids Tramp (frame size 150 × 150 cm) and Kids Tramp XL (frame size 200 × 200 cm). Corner piece with miter on the left. Dimensions: 75/47 × 28 cm. Colour: "grey".
→ NEW FOR ARTICLE E97303
- Article-No.: E97401 Single tile impact protection EPDM, center piece "grey"
Single tile of playground trampoline impact protection EPDM for Kids Tramp XL (frame size 200 × 200 cm). Center piece without miter. Dimensions: 50 × 28 cm. Colour: "grey".
→ NEW FOR ARTICLE E97301
- Article-No.: E97402 Single tile impact protection EPDM, corner piece with miter on the right "grey"
Single tile of playground trampoline impact protection EPDM for Kids Tramp (frame size 150 × 150 cm) and Kids Tramp XL (frame size 200 × 200 cm). Corner piece with miter on the right. Dimensions: 75/47 × 28 cm. Colour: "grey".
→ NEW FOR ARTICLE E97302
- Article-No.: E97501 Impact protection system
Impact protection system with rounded border towards jumping bed. For Kids Tramp XL built-in frame 200 × 200 cm, with 4 adhesive cartridges. Colour: grey.
Consisting of 12 impact protection tiles:
• 4× Cornerpiece with mitre on the right, 75/47 × 28 cm (E97302)
• 4× Cornerpiece with mitre on the left, 75/47 × 28 cm (E97303)
• 4× Centrepiece, 50 × 28 cm (E97301)
- Article-No.: E97303 Single tile impact protection, cornerpiece with mitre on the left
Single tile of playground trampoline impact protection for Kids Tramp, frame size 150 × 150 cm and Kids Tramp XL, frame size 200 × 200 cm. Cornerpiece with mitre on the left. View: from the inner side to the outer side (standing on the trampoline). Colour: Grey
- Article-No.: E97301 Single tile impact protection, centrepiece
Single tile of playground trampoline impact protection for Kids Tramp XL, frame size 200 × 200 cm. Dimensions of the tile: 50 × 28,5 cm. Centrepiece without mitre. Colour: Grey
- Article-No.: E97302 Single tile impact protection, cornerpiece with mitre on the right
Single tile of playground trampoline impact protection for Kids Tramp, frame size 150 × 150 cm and Kids Tramp XL, frame size 200 × 200 cm. Cornerpiece with mitre on the right. View: from the inner side to the outer side (standing on the trampoline). Colour: Grey
-
- Impact protection accessories
- Article-No.: E97502 Rubber protection bar (4 sides)
Rubber protection bars (4 sides) for Kids Tramp 200 × 200 cm, inclusive screws. Only needed if Kids Tramp is ordered without impact protection system or for use with EPDM wet pour surface. For complete orders it is shipped assembled.
- Article-No.: E97522 Rubber protection bar (1 side)
Rubber protection bar (1 side) for Kids Tramp XL frame 200 × 200 cm, inclusive screws.
- Article-No.: E97548 PlayPro™ impact protection lip - set SQUARE
PlayPro™ impact protection lip set SQUARE for impact protection system of Kids Tramp XL (frame size: 200×200 cm). 1 set = 8 pcs, incl. adhesive. For use with EPDM wet pour surface or artificial turf.
PlayPro™ was developed by Rampline in cooperation with Eurotramp and meets the requirements of DIN EN 1176.
Note: the playground trampoline is not included. - Article-No.: E97003 Adhesive for impact protection systems
Adhesive for playground trampoline impact protection systems, 1 piece.
- Article-No.: E97043 Adhesive cartridge for impact protection "slate grey"
Adhesive cartridge for Kids Tramp impact protection "slate grey".
As from August 24th, 2023, adequate training is required prior to industrial or professional use. See QR Code on the adhesive cartridge or visit pu-training.com.
-
- Jumping beds
- downloads
- FAQ
- local dealers
Product Details
Kids Tramp "Kindergarten XL"
related products
PlayPro™ rubber protection ring/lip for EPDM wet pour surface or artificial turf
Kids Tramp & Kids Tramp Track
to the product