article no: 97000-97000B

Kids Tramp "Playground"

Vandal-proof, no supervision required - 1,50 × 1,50 m

According to the playground standard DIN EN 1176. The Kids Tramp "Playground" is already completely mounted when it is delivered, all that is needed is to glue the bonded impact protection on the frame and set it into a pit. Jumping bed made of six-times wire-reinforced belt fabric. Upon request with special coating for even more durability.

Ideal for schools and kindergartens, water parks, recreation parks, playgrounds, camping grounds, shopping malls, public parks and pleasure grounds, hotels, private gardens, zoos and many more!

Accessories: Impact protection system (not included), for EPDM wet pour surfaces PlayPro™ connection/end lip or rubber protection bars recommended!

TÜV certified (EN 1176) TÜV certified (EN 1176)
The trampoline is TÜV-certified according to the playground equipment standard EN 1176 and is therefore suitable for publicly accessible playgrounds.
Flame retardant Flame retardant
The sixfold wire reinforced belt material is vandal-proof and therefore flame retardant.
Vandal-proof Vandal-proof
The jumping bed is made of sixfold wire reinforced belt material and features a high level of vandalism safety. It is specially designed for unattended public playground areas.
All-season use All-season use
The trampoline is designed und suitable for long-term outdoor use and can be left there all year.
Patented Patented
The playground trampoline „Kids Tramp“ is protected by patent law. European Patent No.: 2189189.
Made in Germany Made in Germany
Equipment is produced exclusively in our factory in Weilheim/Teck (Germany). We guarantee the use of only the highest quality raw materials in order to guarantee outstanding quality of all components as well as safety and reliability.
UV-light resistant UV-light resistant
All components (jumping bed, bonded impact protection, steel springs) are made of UV-light resistant material.
Water-resistant Water-resistant
The trampoline is equipped with hot-dip galvanized springs and a weather proof jumping bed and thus can be left outdoor even in wet conditions.
Suitable for wheelchairs Suitable for wheelchairs
Safe entry and exit with attendant thanks to rounded edges.
Approved Competence ✓ BSFH quality seal Approved Competence ✓ BSFH quality seal
Eurotramps playground trampolines are distinguished with the quality seal of the BSFH (Federal Association of Playground Equipment and Leisure Facility Manufacturers).The BSFH quality seal is awarded every two years and is the industry award for assured quality, social responsibility, organisation and professional expertise.
  • details
  • accessories
  • spare parts

    We offer various spare parts for Kids Tramp "Playground".

    • Jumping beds
      • Article-No.: E21898 Jumping bed

        Jumping bed made of sixfold wire-reinforced belt fabric, with anchor bars. Size: 107 × 107 cm. For Kids Tramp "Playground" and Kids Tramp "Playground Loop".

      • Article-No.: E21898B Jumping bed + additional coating

        Jumping bed made of sixfold wire-reinforced belt fabric with additional coating. Size: 107 × 107 cm. For Kids Tramp "Playground" and Kids Tramp "Playground Loop".

    • Jumping bed accessories & corresponding spare parts
      • Article-No.: E20970 Anchor bar

        Anchor bar for Kids Tramp playground trampolines. Hot-dip galvanized.

    • Steel springs/suspension
      • Article-No.: E31120 Steel spring

        Steel spring for playground trampolines Kids Tramp, Kids Tramp Track, Sport-Thieme® Adventure-Tramp, Wehrfritz FUN XL and Wehrfritz FUN round. Hot-dip galvanized. Length 145 mm, Ø 20 mm.

    • Suspension accessories & corresponding spare parts
      • Article-No.: E31100 Mounting tool for steel springs

        Mounting tool for easier attaching of the steel springs. For Playground Trampolines.

    • Spare parts for trampoline frame & Safety Platforms
      • Article-No.: E41977 Supporting angle

        Supporting angle for frame reinforcement for playground trampolines Kids Tramp and Kids Tramp XL. Scope of delivery: 4 pieces, incl. tension chains, quick links, mounting tool for steel springs. 

        Note:
         can only be used for Kids Tramps with manufacturing date before 06/2018.

    • Impact protection
      • Article-No.: E97041 Impact protection system EPDM "grey"

        Impact protection system EPDM for Kids Tramp (frame size150 × 150 cm), incl. 3 adhesive cartridges. Colour: "grey".

        Consisting of 8 impact protection tiles:
        • 4× Corner part with miter on the right, 75/47 × 28 cm (E97402)
        • 4× Corner part with miter on the left, 75/47 × 28 cm (E97403)

        → NEW FOR ARTICLE E97001

      • Article-No.: E97403 Single tile impact protection EPDM, corner piece with miter on the left "grey"

        Single tile of playground trampoline impact protection EPDM for Kids Tramp (frame size 150 × 150 cm) and Kids Tramp XL (frame size 200 × 200 cm). Corner piece with miter on the left. Dimensions: 75/47 × 28 cm. Colour: "grey".

        → NEW FOR ARTICLE E97303

      • Article-No.: E97402 Single tile impact protection EPDM, corner piece with miter on the right "grey"

        Single tile of playground trampoline impact protection EPDM for Kids Tramp (frame size 150 × 150 cm) and Kids Tramp XL (frame size 200 × 200 cm). Corner piece with miter on the right. Dimensions: 75/47 × 28 cm. Colour: "grey".

        → NEW FOR ARTICLE E97302

      • Article-No.: E97001 Impact protection system

        Impact protection system with rounded border towards jumping bed. For Kids Tramp built-in frame 150 × 150 cm, with 3 adhesive cartridges. Colour: grey.

        Consisting of 8 impact protection tiles:
        • 4× Cornerpiece with mitre on the right, 75/47 × 28 cm (E97302)
        • 4× Cornerpiece with mitre on the left, 75/47 × 28 cm (E97303)

      • Article-No.: E97303 Single tile impact protection, cornerpiece with mitre on the left

        Single tile of playground trampoline impact protection for Kids Tramp, frame size 150 × 150 cm and Kids Tramp XL, frame size 200 × 200 cm. Cornerpiece with mitre on the left. View: from the inner side to the outer side (standing on the trampoline). Colour: Grey

      • Article-No.: E97302 Single tile impact protection, cornerpiece with mitre on the right

        Single tile of playground trampoline impact protection for Kids Tramp, frame size 150 × 150 cm and Kids Tramp XL, frame size 200 × 200 cm. Cornerpiece with mitre on the right. View: from the inner side to the outer side (standing on the trampoline). Colour: Grey

    • Impact protection accessories
      • Article-No.: E97002 Rubber protection bar (4 sides)

        Rubber protection bars (4 sides) for Kids Tramp 150 × 150 cm, inclusive screws. Only needed if Kids Tramp is ordered without impact protection system or for use with EPDM wet pour surface. For complete orders it is shipped assembled.

      • Article-No.: E97022 Rubber protection bar (1 side)

        Rubber protection bar (1 side) for Kids Tramp frame 150 × 150 cm, inclusive screws.

      • Article-No.: E97048 PlayPro™ impact protection lip - set SQUARE

        PlayPro™ impact protection lip set SQUARE for impact protection system of Kids Tramp (frame size: 150×150 cm). 1 set = 4 pcs, incl. adhesive. For use with EPDM wet pour surface or artificial turf.

        PlayPro™ was developed by Rampline in cooperation with Eurotramp and meets the requirements of DIN EN 1176.

        Note: the playground trampoline is not included.

      • Article-No.: E97043 Adhesive cartridge for impact protection "slate grey"

        Adhesive cartridge for Kids Tramp impact protection "slate grey".

        As from August 24th, 2023, adequate training is required prior to industrial or professional use. See QR Code on the adhesive cartridge or visit pu-training.com.

  • downloads
  • FAQ
  • local dealers

Product details

Kids Tramp "Playground"

Product details

Preview it with your smartphone in AR!

Find the optimal place for your Kids Tramp "Playground".
Place a virtual version of the Kids Tramp "Playground" with your smartphone camera in the room (e.g., in your garden).

Kids Tramp "Playground" Original Dimensions Trampoline: 150x150 cm
Note: The dimensions of the AR model may vary slightly when placed in the room, please take this into account when planning (observe installation drawings!).

related products

Impact protection system EPDM

Impact protection system EPDM

Kids Tramps

to the product
Eurotramp PLAY!

Eurotramp PLAY!

Game & Sound for Eurotramp playground trampolines

to the product