article no: 27300-28201
Safety platforms and safety mats "Competition Universal*"
For Ultimate & Grand Master models
The safety platforms made of proven steel – especially produced for Eurotramp – are extremely stable and guarantee a high longevity. The safety mats with wedge consist of a highly qualitative PE-foam that attains optimum cushioning and therefore minimizes the risk of injury. The wedge can be removed within seconds so that the mats can also be utilised elsewhere.
In the event that two trampolines have to be placed closely next to each other, only one safety platform can be placed between the trampolines. In this case, one safety mat with double wedge will serve the purpose. However, one must take into account that both athletes will only have one common safety mat in the middle of the trampolines.
*Safety platforms "Competition Universal" replace earlier "Competition" safety platforms. Spare parts for "Competition" models are still available on request.
- Made in Germany
- Equipment is produced exclusively in our factory in Weilheim/Teck (Germany). We guarantee the use of only the highest quality raw materials in order to guarantee outstanding quality of all components as well as safety and reliability.
- spare parts
We provide various spare parts for Safety platforms and safety mats "Competition Universal*".
- Jumping beds
- Article-No.: E21927 BedBed for Safety Platform "Competition", made of polypropylene. Dimensions: 210 × 120 cm.
- Steel springs/suspension
- Article-No.: E33227 Rubber cable, long sideRubber cable, long side, with 15 hooks and 2 2-hole plates. Length 420 cm, Ø 11,4 mm. For Safety Platform "Universal".
- Article-No.: E33228 Rubber cable, short sideRubber cable, short side, with 9 hooks and 2 2-hole plates. Length 420 cm, Ø 11,4 mm. For Safety Platform "Universal".
- Suspension accessories & corresponding spare parts
- Article-No.: E31020 Hook for rubber cableHooks for rubber cable. Ø 11,4 mm. For Minitramp 112 / 125 and Safety Platforms.
- Article-No.: E31005 2-hole plate for rubber cables2-hole plate for rubber cable. Ø 11,4 mm. For Minitramp 112 / 125 and Safety Platforms.
- Spare parts for trampoline frame & Safety Platforms
- Article-No.: E44070 Rubber cable for leg braceRubber cable for leg brace with tenterhook and eye hook. Length 420 mm, Ø 11,4 mm.
- Article-No.: E33229 Rubber cable long sideRubber cable without hooks and plates for long side of Safety Platforms "Competition Universal". Length: 420 cm, Ø 11,4 mm.
- Article-No.: E33230 Rubber cable short sideRubber cable without hooks and plates for short side of Safety Platforms "Competition Universal". Length: 230 cm, Ø 11,4 mm.
- Article-No.: E44090 Safety boltSafety bolt complete with split-pin for Safety Platforms.
- Article-No.: E45101 Floor protection large with screwsFloor protection large c/w with screws for Grand Master, Master, Minitramp Open-End and Safety Platforms.
- Article-No.: E44009 Plastic-coated steel ropePlastic-coated steel rope for Safety Platforms "Competition Universal" with turnbuckle M8 and 5x screw cap. Total length 88 cm, steel rope 58 cm.
- Article-No.: E45900 Castor (1 piece)Castor for easier transport of Minitramp Open-End, Teamgym and Safety Platform. Scope of delivery: 1 piece.
Required castors per unit:
• Minitramp Open-End: 2 pcs.
• Teamgym: 3 pcs.
• Safety Platform: 2 pcs.
- Article-No.: E27316 Clamp leftClamp left for safety platform "Competition Universal".
- Article-No.: E27315 Clamp rightClamp right for safety platform "Competition Universal".
- Article-No.: E44092 Mini index plungerMini index plunger for Safety Platform "Competition Universal". Colour: black.
- Jumping beds
- local dealers