Following we provide a list of frequently asked questions (FAQ) about Double-Minitramp 190.

Can I wash a trampoline jumping bed in the washing machine?

In principle all Eurotramp jumping beds made of polyester, nylon or double perlon can be washed in the washing machine. The jumping bed should be put away from the trampoline frame and can be washed with a maximum temperature of 30° with a mild detergent or textile detergent and should be washed with delicate wash cycle (no spin cycle!).

Absolutely follow:
• The 4 metal rings on the corners should be fixed with tape for the protection of the jumping bed and the washing machine.
• IMPORTANT: The jumping bed should be hooked in the trampoline frame again in humid or wet state. If not the nylon strings will tighten and the bed will become useless.

Can defective jumping beds be repaired?

In general, all nylon-band beds can be repaired at a favourable price. Should individual nylon bands be damaged, these can be removed and new bands oven and sewn in. Repairing PVC-coated beds (yellow material) is equally as problem-free using high frequency welding. After receiving and inspecting a bed at Eurotramp, we pass to an offer and advise on whether repair is worthwhile. After the go-ahead to repair, beds can be repaired and ready for dispatch within a few days.

Is Eurotramp able to produce trampoline frames, jumping beds and frame pads as custom-made models or as spare parts for other brands?

In general we are able to produce all these components as custom-made models or spare parts for other brands. Here it is important that we will receive the right descriptions and dimensions of the requested parts in order to avoid any discrepancies in production. Should you require telephone or email advice, please do not hesitate to contact us.

Is trampolining dangerous? Which safety rules should be observed?

Every sports discipline has its own hidden dangers, trampolining included. Nonetheless, the risks can be avoided to a large extent by following the safety rules. Every novice should approach trampolining cautiously. In general, trampolining is not difficult to learn, but too much self-confidence when performing often leads to boisterousness, which can cause accidents. Eurotramp's large apparatus are high performance apparatus, which must not be underestimated - or would you drive round a corner at the same speed as Schuhmacher, if you were only an apprentice? One step at a time! Children especially should trampoline under adults supervision as far as possible.

Where can you learn trampolining?

Trampolining may be no longer just be seen as show artistry. These days, there are many clubs all over Germany which professionally train for competitions. On request, we will send you a list of the German clubs which take part in national championships. In general, you can also find information on the website of the German Gymnastics Federation. There you will also find information about possible training to become a trampoline coach.

Can a 6x6 mm bed be fitted to a Double Minitramp 190?

No, it is not possible to put a 6x6 mm bed into a Double Minitramp 190 because this jumping bed needs a stronger frame. It can only be put into a Ultimate DMT frame.

How much is a trampolinist allowed to weight?

Basically, for Eurotramp trampolines, there is no weight limit, as all trampolines are designed for a multiple of the body weight. People with joint complaints or overweight people should start trampolining slowly. Of course, general physical and psychological constitution also makes a difference.

Is it possible to repair broken or old trampolines?

Our trampolines are constructed extremely robustly: we often receive pieces of equipment that have been in use for more than 30 years.

But after such a long period of time, even these pieces of equipment require an overhaul. Jumping beds, overall covers and springs can be substituted by the customer himself. On the frame; smaller parts such as chains and feet-rest mounts can be substituted on the spot.

Problems arise when the hinges are worn out after many years of being opened out and folded down again, or for example if the roller stands or lifting roller stands are broken. Should an economic efficiency calculation come to the conclusion that a general overhaul would be worthwhile, then this could be done either by the customer, an external maintenance service or directly by Eurotramp, according to the state of the device in question.

Complicated repairs to the frame make the dispatching of the trampoline to the Eurotramp plant in Weilheim an der Teck necessary.

In order to arrive at an initial assessment regarding the extent of the necessary repair work, it is helpful if you send us, whenever possible, detailed photographs of the trampoline or the possible damage.

Then we could make you a provisional offer and, if required, arrange for your equipment to be collected.

Before the final repair work is done, we would gladly send you a binding costs estimate and obtain your approval for the work. 1-2 weeks later your equipment is once again in full working order and can be returned to you.

Regarding the question of using older trampolines we would like to say, however, that material fatigue, e.g. to the jumping beds, can represent a high risk to the user. For liability reasons, we recommend that, when in doubt, old trampoline components should be replaced.

What does the FIG-approved symbol mean?

For competitions, the Fédération Internationale de Gymnastique (International Gymnastics Federation FIG) has exact specifications of the construction type of the trampoline to be used in competitions. All trampolines and accessories used in competitions and supplied by Eurotramp have a valid certificate.