Following two years of extensive development, we are proud to release the new Ultimate. This impressive state of the art piece of equipment has outstanding improvements in durability, usability, safety and stability. Tried and tested by many of the world´s elite gymnasts and the friendly support of Rebound Products (Dave Ross), the Ultimate is a huge step and enrichment for the trampoline family. It will be the recommended competition trampoline for the World Championships 2014 in Daytona Beach (USA) and Odense 2015.
All innovations and advantages at a glance:
• 200% more tension in the leg section, giving an outstanding stability to the frame
• Long term consistent performance characteristics and reduced "jump-in time"
• Superb balance between the fl exibility of the frame and its strength with high-tech steel of supreme quality
• "Easy-Lock-System" to set up the trampoline quicker and more efficiently
• Laser-cut accuracy giving the new frame design greater potential for safety
• Unique engineered hinge design with block friction bearings giving more resistance to wear and tear • "Ultimate"-springs for optimum dynamics and longevity
• "Ultimate" adaption kit for older end decks to make them compatible with the Ultimate 4x4*
• Avilable with 32 mm, 50 mm foldable or 50 mm stationary padding
I det følgende kan du finde en liste med alle reservedele, der er til rådighed. For yderligere informationer klik venligst på den reservedel, du er interesseret i. Med søgefunktionen kan du præcist afgrænse søgningen af reservedelene.
-
Click to view details
Varenr.: E26410
Jumping bed, 4x4 mm
mereJumping bed, 426 x 213 cm, with 4x4 mm wide woven nylon bands complete with stitched-in anchor bars
-
Click to view details
Varenr.: E25410
Jumping bed, 5x4 mm
mereJumping bed, 426 x 213 cm, made of 5x4 mm wide weaved nylon bands with stitched-in anchor bars
-
Click to view details
Varenr.: E26210
Jumping bed, 6x4 mm
mereJumping bed, 426x213 cm, made of 6x4 mm wide weaved nylon bands with stitched-in anchor bars
-
Click to view details
Varenr.: E31130
Steel spring for Grand Master Exclusiv, Ultimate
mereSteel spring (length 258 mm, Ø 29 mm) for Grand Master Exclusiv, Ultimate
-
Click to view details
Varenr.: E31131
Steel spring, strengthened spring for corner
mereStrengthened steel spring for corners (length 258 mm, Ø 39 mm)
-
Click to view details
Varenr.: E10090
Steel spring for fastening black belt
mereSteel spring (length 185 mm, Ø 20 mm) for fastening black belt.
-
Click to view details
Varenr.: E20005
Anchor bar
mereAnchor bar to fit jumping bed for Ultimate, Premium, Grand Master Exclusiv, Grand Master, Master and Minitramp
-
Click to view details
Varenr.: E31000
Mounting tool
mereMounting tool (for easier attaching of the steel springs)
-
Click to view details
Varenr.: E11110
Coverall frame pad - complete - 32 mm
mereCoverall frame pad complete set for Grand Master models, foam thickness 32 mm, with Velcro fastener and fastening set for black belt
-
Click to view details
Varenr.: E14110
Coverall frame pad - long side - 32 mm
mereCoverall frame pad, long side for Grand Master models, foam thickness 32 mm
-
Click to view details
Varenr.: E15110
Coverall frame pad - short side - 32 mm
mereCoverall frame pad, short side for Grand Master models, foam thickness 32 mm
-
Click to view details
Varenr.: E11115
Coverall frame pad - 50 mm stationary
mereCoverall frame pad - 50 mm stationary with fastening set for black belt and Velcro fastener for Ultimate
-
Click to view details
Varenr.: E11111
Coverall frame pad - 50 mm foldable
mereCoverall frame pad - 50 mm foldable for Ultimate and Premium with fastening set for black belt and Velcro fastener
-
Click to view details
Varenr.: E10087
Strap, non elastic for fastening black belt - frame pads
mereStrap, non elastic for fastening black belt - frame pads
-
Click to view details
Varenr.: E13110
Fastening set for coverall frame pads
mereFastening set consisting of 12 spring clips, 4 steel springs (length 185 mm, Ø 20 mm), 8 steel springs (length 145 mm, Ø 20 mm) and 1 black belt.
For Grand Master models. -
Click to view details
Varenr.: E10095
Spring clip to hold up frame pads
mereSpring clip to hold up frame pads for Grand Master
-
Click to view details
Varenr.: E44126
Blue handle
mereBlue handle ("Easy-Lock") for leg support (Ultimate)
-
Click to view details
Varenr.: E44106
Double torsion spring between large support and wing (left/right)
mereDouble torsion spring between large support and wing (left/right) for Ultimate trampoline
-
Click to view details
Varenr.: E44146
Ball-joint-connection
mereBall-joint-connection ("Easy-Lock") between leg and leg brace for Ultimate trampoline
-
Click to view details
Varenr.: E45106
Floor protection c/w with screws
mereFloor protection c/w with screws for Ultimate
-
Click to view details
Varenr.: E46099
Tension pin for hinge
mereTension pin for hinge, Ø 11,8 mm
-
Click to view details
Varenr.: E44206
Brass ring for leg
mereBrass ring for leg Ultimate and Ultimate DMT
-
Click to view details
Varenr.: E44006
Plastic coated steel cable
merePlastic coated steel cable with turnbuckles M10 and snap-hook for Ultimate
-
Click to view details
Varenr.: E44020
Turnbuckles M10
mereTurnbuckles M10 for Grand Master and Master
-
Click to view details
Varenr.: E44025
Snap-hook
mereSnap-hook for chain for Grand Master Exclusiv
-
Click to view details
Varenr.: E44028
Quick link for chains
mereQuick link for chains
-
Click to view details
Varenr.: E44007
Rotary swivel for wire rope
mereRotary swivel for wire rope for Ultimate trampoline
-
Click to view details
Varenr.: E44110
Screw M12 x 170 mm with nut for large goose neck
mereScrew M12 x 170 mm with nut for large goose neck, Ultimate
-
Click to view details
Varenr.: E44111
Screw M6 x 90 mm with nut for small goose neck
mereScrew M6 x 90 mm with nut for small goose neck, Ultimate
-
Click to view details
Varenr.: E44112
Screw M12 x 25 mm with nut, for connection large goose neck and additional (small) goose neck
mereScrew M12 x 25 mm with nut, for connection large goose neck and additional (small) goose neck, Ultimate
-
Click to view details
Varenr.: E44108
Allen screw M10 x 12 mm for leg section
mereAllen screw M10 x 12 mm for leg section
-
Click to view details
Varenr.: E50070
Connecting tube
mereConnecting tube for (lifting) roller stands, lockable with two black winged screws,
for easier transport and storing of (lifting) roller stands -
Click to view details
Varenr.: E50001
Castor c/w fastening kit
mereCastor c/w fastening kit for roller stands and lifting roller stands
-
Click to view details
Varenr.: E50003
Fastening kit for castor
mereFastening kit for castor
-
Click to view details
Varenr.: E50022
Washer with screw M12 x 25
mereWasher with screw M12 x 25 for lifting roller stand
-
Click to view details
Varenr.: E50041
Hook c/w cap nut for lifting roller stand
mereHook c/w cap nut M14 for lifting roller stand
-
Click to view details
Varenr.: E50040
Hook c/w cap nut for roller stand & lifting roller stand "Safe & Comfort"
mereHook c/w cap nut M14 for roller stand and lifting roller stand "Safe & Comfort"
-
Click to view details
Varenr.: E50049
Nylon-bearing
mereNylon-bearing for lifting roller stand
-
Click to view details
Varenr.: E44115
Bearing at hinge between small leg support and wing
mereBearing at hinge between small leg support and wing for Ultimate
-
Click to view details
Varenr.: E44116
Bearing at hinge between large leg support and wing
mereBearing at hinge between large leg support and wing for Ultimate
-
Click to view details
Varenr.: E44117
Bearing to connect large and small leg support
mereBearing to connect large and small leg support for Ultimate
-
Click to view details
Varenr.: E46016
Bearing at hinge leg section/side rail
mereBearing at hinge leg section/side rail for Ultimate (4 pieces)
-
Click to view details
Varenr.: E50050
Red knob for lifting roller stand
mereRed knob for lifting roller stand
-
Click to view details
Varenr.: E50055
Red knob bolt for lifting roller stand, complete with red knob
mereRed knob bolt for lifting roller stand, complete with red knob
-
Click to view details
Varenr.: E50060
Safety bow for roller stand
mereSafety bow for roller stand
-
Click to view details
Varenr.: E50030
Roll bow for roller stand
mereRoll bow for roller stand
-
Click to view details
Varenr.: E50035
Roll bow for lifting roller stand
mereRoll bow for lifting roller stand
-
Click to view details
Varenr.: E40006
Plastic cap for steel tube, Ø 35 mm
merePlastic cap for steel tube, Ø 35 mm
-
Click to view details
Varenr.: E40005
Plastic cap for flat oval steel tube
merePlastic cap for flat oval steel tube 65 x 35 x 2,5 mm
-
Click to view details
Varenr.: E26000
DIY set | New jumping bed markings
mereDIY set for applying the additional jumping bed markings in accordance with the new FIG specifications 2017. It consists of:
• appropriate diluted colour for direct application to the bed (a bottle is sufficient for two jumping beds!),
• a metal stencil and
• a paint roller. -
Click to view details
Varenr.: E26001
Further bottle of special paint for new jumping bed markings (1 piece)
mereFurther bottles of the special paint for the new jumping bed markings in accordance with the new FIG specifitionas 2017. A bottle is sufficient for two jumping beds.