The Grand Master model is the forerunner of the Grand Master Exclusiv. It was developed in the Seventies at a time when the proficiency level in trampolining was getting higher and higher. It has the same frame measures as the Exclusiv and Premium models, but is 7 cm lower and has a round pipe pedestal. Grand Master models offer outstanding cost-effectiveness and have been used for many years in organised sport, schools and therapy. Several jumping bed variations enable usage geared exactly to the area of application.
Grand Master has been continuously developed and improved until today, making it an excellent apparatus for everyone with sporting ambitions.
Following you will find a list of all available spare parts. For further information please click on the spare part you are interested in. With the search function you can precisely limit the shown spare parts.
-
Click to view details
Article ID: E21510
Jumping bed, 13 mm for Grand Master
moreJumping bed, 426 x 213 cm, with 13 mm wide woven nylon bands complete with anchor bars for Grand Master
-
Click to view details
Article ID: E21710
Jumping bed, 45 mm for Grand Master
moreJumping bed, 426 x 213 cm, with 45 mm wide woven nylon bands complete with anchor bars for Grand Master
-
Click to view details
Article ID: E21910
Jumping bed "School", synthetic for Grand Master
moreJumping bed, 426 x 213 cm, made of synthetic fabric (polyester) complete with stitched-in anchor bars for Grand Master
-
Click to view details
Article ID: E31102
Steel spring for Grand Master, Master, Minitramp leg brace
moreSteel spring (length 235 mm, Ø 30 mm) for Grand Master, Master, Minitramp leg brace
-
Click to view details
Article ID: E10090
Steel spring for fastening black belt
moreSteel spring (length 185 mm, Ø 20 mm) for fastening black belt.
-
Click to view details
Article ID: E10091
Steel spring for fastening frame pads, short side
moreSteel spring (length 145 mm, Ø 20 mm) for fastening frame pads, short side
-
Click to view details
Article ID: E20005
Anchor bar
moreAnchor bar to fit jumping bed for Ultimate, Premium, Grand Master Exclusiv, Grand Master, Master and Minitramp
-
Click to view details
Article ID: E31000
Mounting tool
moreMounting tool (for easier attaching of the steel springs)
-
Click to view details
Article ID: E11110
Coverall frame pad - complete - 32 mm
moreCoverall frame pad complete set for Grand Master models, foam thickness 32 mm, with Velcro fastener and fastening set for black belt
-
Click to view details
Article ID: E14110
Coverall frame pad - long side - 32 mm
moreCoverall frame pad, long side for Grand Master models, foam thickness 32 mm
-
Click to view details
Article ID: E15110
Coverall frame pad - short side - 32 mm
moreCoverall frame pad, short side for Grand Master models, foam thickness 32 mm
-
Click to view details
Article ID: E10087
Strap, non elastic for fastening black belt - frame pads
moreStrap, non elastic for fastening black belt - frame pads
-
Click to view details
Article ID: E10088
Strap, elastic for fastening frame pads - frame (OLD VERSION)
moreStrap, elastic for fastening frame pads - frame (old version.)
NEW TRAMPOLINES WILL BE EQUIPPED WITH VELCRO FASTENER! -
Click to view details
Article ID: E13110
Fastening set for coverall frame pads
moreFastening set consisting of 12 spring clips, 4 steel springs (length 185 mm, Ø 20 mm), 8 steel springs (length 145 mm, Ø 20 mm) and 1 black belt.
For Grand Master models. -
Click to view details
Article ID: E10095
Spring clip to hold up frame pads
moreSpring clip to hold up frame pads for Grand Master
-
Click to view details
Article ID: E13010
Black belt for ground trampoline "Grand Master"
moreBlack belt for ground trampoline "Grand Master"
-
Click to view details
Article ID: E46099
Tension pin for hinge
moreTension pin for hinge, Ø 11,8 mm
-
Click to view details
Article ID: E45101
Floor protection with screws
moreFloor protection large c/w with screws to fit Premium, Grand Master Exclusiv, Grand Master, Master, Double-Minitramp, Open-End-Minitramp, Hobbytramp and supplementary frames
-
Click to view details
Article ID: E44199
Washer with screw M10
moreWasher with screw M10 for leg socket at side rail
-
Click to view details
Article ID: E44002
Chain c/w turnbuckles M10
moreChain c/w turnbuckles M10 for Grand Master and Master models
-
Click to view details
Article ID: E44020
Turnbuckles M10
moreTurnbuckles M10 for Grand Master and Master
-
Click to view details
Article ID: E44028
Quick link for chains
moreQuick link for chains
-
Click to view details
Article ID: E44033
Tube - 135 / 35
moreTube (length 135 mm, Ø 35 mm) complete with plastic caps
-
Click to view details
Article ID: E44121
Leg brace
moreLeg brace for Grand Master
-
Click to view details
Article ID: E44070
Rubber cable for leg brace
moreRubber cable for leg brace. Length 450 mm, Ø 11,4 mm.
-
Click to view details
Article ID: E44108
Allen screw M10 x 12 mm for leg section
moreAllen screw M10 x 12 mm for leg section
-
Click to view details
Article ID: E50001
Castor c/w fastening kit
moreCastor c/w fastening kit for roller stands and lifting roller stands
-
Click to view details
Article ID: E50003
Fastening kit for castor
moreFastening kit for castor
-
Click to view details
Article ID: E50022
Washer with screw M12 x 25
moreWasher with screw M12 x 25 for lifting roller stand
-
Click to view details
Article ID: E50041
Hook c/w cap nut for lifting roller stand
moreHook c/w cap nut M14 for lifting roller stand
-
Click to view details
Article ID: E50040
Hook c/w cap nut for roller stand & lifting roller stand "Safe & Comfort"
moreHook c/w cap nut M14 for roller stand and lifting roller stand "Safe & Comfort"
-
Click to view details
Article ID: E50049
Nylon-bearing
moreNylon-bearing for lifting roller stand
-
Click to view details
Article ID: E50050
Red knob for lifting roller stand
moreRed knob for lifting roller stand
-
Click to view details
Article ID: E50055
Red knob bolt for lifting roller stand, complete with red knob
moreRed knob bolt for lifting roller stand, complete with red knob
-
Click to view details
Article ID: E50060
Safety bow for roller stand
moreSafety bow for roller stand
-
Click to view details
Article ID: E50030
Roll bow for roller stand
moreRoll bow for roller stand
-
Click to view details
Article ID: E50035
Roll bow for lifting roller stand
moreRoll bow for lifting roller stand
-
Click to view details
Article ID: E50070
Connecting tube
moreConnecting tube for (lifting) roller stands, lockable through 2 winged screws, for easier transport and storing of (lifting) roller stands
-
Click to view details
Article ID: E44102
Goose neck
moreGoose neck for Grand Master, Master
-
Click to view details
Article ID: E40006
Plastic cap for steel tube, Ø 35 mm
morePlastic cap for steel tube, Ø 35 mm
